Category: Protest Signs

Once your 16×20 Posters arrive you will need to assemble them. MORE INFO ON ORDERING SIGNS 1. 5 gallon paint sticks 21″ (1 Stick per sign) They usually come in 3 packs for about .98 (If you’re buying something else at the store or be nice to the store clerk they may donate them for free) Try asking we’ve gotten a good number of free sticks Found at Lowe’s, Home Depot and other hardware, paint stores 2. Foam Board 20″x30″ (a Board for 2 signs) Foam core boards 20″X30″ can be cut in half and used for 2 signs leaving an inch or so without backing but still support the sign, Readi-Board is located at 5955 Crossroads Commerce Wyoming, MI 49519 (616) 261-4400 their boards are carried by most major stores such as Walmart, Michels, .99 Stores, Dollar Tree, Office Depot Need more retailers who carry foam board Google “Readi-board” click on Shopping option under the search box 3.  Some good quality wood glue, can be found at most hardware stores 4. Some good quality spray on adhesive,Gorilla or 3M work well usually about $10 a can and found at the hardware stores above Tools: A. Hammer or mallet, the heavier the better B. Spray on adhesive C. Staple gun D. T50 3/8″ 10mm staples E. Wood Glue F. Roller (can be any type) that will apply even pressure to remove bubble and ensure equal pressure INSTRUCTIONS 1.Cut your 20″ x 30″Form board in half so you have 2 (20″ x 15″) Sections. Note the poster will overlap the foam board so make sure to center the poster over the foam board, however to protect the top portion of the poster butt the foam board and poster to the top…. Read More